Drainvac Wireless Receiver Kit (KIT-REC120)
The Drainvac KIT-REC120 Wireless Reciever gives you the ability to extend the range of the wireless system (hose). This receiver is designed to be used with the Drainvac BL-RF34 Central Vacuum Hose. The KIT-REC120 requires electrical power from a 120 v plug in wall adapter and can be installed in any location close to a 120v electrical receptacle with the provided mounting hardware. If you have any questions please call 1-800-322-2965 and one of our central vacuum experts will be happy to assist you.
Easy Ordering
Instructions for the Drainvac/VacuVision Wireless Reciever
1. Install the RF915 components as per the installation instruction manual.
2. Programming the hose handle.
Place the three-way switch of the hose to the off position. Insert the hose end into the vacuum inlet valve. Connect the hose to high voltage via direct connect contacts in the inlet valve or inserting cord end into the electrical outlet. Press the small black button on the top edge of the wireless receiver. The green light on the front should light up. Move the three-way switch on the hose to the right position for approximately one second. The green light on the receiver should turn off. Move the three-way switch to the off position. Then move the three-way switch to the right position. The central vacuum should activate.
CUSTOMERS ALSO PURCHASED THESE RELATED ITEMS
-17% Was $29.95
Save: 17%
Save $5.00 (17%) through 09/19/2024
Save: 17%
On Sale: $24.95
Save $5.00 through 09/19/2024
Price $24.95
Product Description
Product Specifications
Product Reviews
Read about the Wireless Receiver By Drainvac Instructions for the Drainvac/VacuVision Wireless Reciever
1. Install the RF915 components as per the installation instruction manual.
2. Programming the hose handle.
Place the three-way switch of the hose to the off position. Insert the hose end into the vacuum inlet valve. Connect the hose to high voltage via direct connect contacts in the inlet valve or inserting cord end into the electrical outlet. Press the small black button on the top edge of the wireless receiver. The green light on the front should light up. Move the three-way switch on the hose to the right position for approximately one second. The green light on the receiver should turn off. Move the three-way switch to the off position. Then move the three-way switch to the right position. The central vacuum should activate. Specifications of the Wireless Receiver By Drainvac 
Log In
Create New Account